Log in
LEED v4
Neighborhood Development
Smart location & linkages
Smart location

LEED CREDIT

ND-v4 SLLp1: Smart location Required

LEEDuser’s viewpoint

Explore this LEED credit

Post your questions on this credit in the forum, and click on the credit language tab to review to the LEED requirements.

Credit language

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

For All Projects
Either (1) locate the project on a site served by existing water and wastewater infrastructure or (2) locate the project within a legally adopted, publicly owned, planned water and wastewater service area, and provide new water and wastewater infrastructure for the project. The site should also meet the requirements of one of the following four options.
Option 1. Infill sites
Locate the project on an infill site.

OR

Option 2. Adjacent Sites with Connectivity
Locate the project on an adjacent site (i.e., a site that is adjacent to previously developed land) where the connectivity of the adjacent land is at least 90 intersections per square mile (35 intersections per square kilometer) as measured within a ½-mile (800-meter) distance of a continuous segment of the project boundary that constitutes at least 25% of the total project boundary and is adjacent to previous development. Existing intersections may be counted if they were not constructed or funded by the project developer within the past 10 years. Locate and/or design the project such that a through-connection (of the circulation network) intersects the adjacent portion of the project boundary at least every 600 feet (180 meters) on average and at least every 800 feet (245 meters), connecting it with an existing circulation network outside the project; non-motorized through-connections of the circulation network may count for no more than 20% of the total. The exemptions listed in NPDp3 Connected and Open Community do not apply to this option.

OR

Option 3. Transit corridor
Locate the project on a site with existing or planned transit service such that at least 50% of dwelling units and nonresidential use entrances (inclusive of existing buildings) are within a ¼-mile (400-meter) walking distance of bus or streetcar stops, or within a ½-mile (800-meter) walking distance of bus rapid transit stops, light or heavy rail stations, or ferry terminals, and the transit service at those stops in aggregate meets the minimums listed in Table 1. Projects must meet the requirements for both weekday and weekend trips and provide service every day.
Table 1. Minimum daily transit service...minimum weekday and weekend trips per transit type

Weekday trips

Weekend trips

Projects with multiple transit types (bus, streetcar, rail, or ferry)

60

40

Projects with commuter rail or ferry service only

24

6

If transit service is planned but not yet operational, the project must demonstrate one of the following:
  1. The relevant transit agency has a signed full-funding grant agreement with the Federal Transit Administration (or equivalent national agency for projects outside of the U.S.) that includes a revenue operations date for the start of transit service. The revenue operations date must be no later than the date by which 50% of the project’s total building gross floor area will be occupied.
  2. For bus, streetcar, bus rapid transit, or ferry service, the transit agency must certify that it has an approved budget that includes specifically allocated funds sufficient to provide the planned service at the levels listed above and that service at these levels will begin no later than the date by which 50% of the project’s total building gross floor area will be occupied.
  3. For rail service other than streetcars, the transit agency must certify that preliminary engineering for a rail line has begun. In addition, the service must meet either of these two requirements:
  • A state legislature or local subdivision of the state (or a local government for projects outside the U.S.) has authorized the transit agency to expend funds to establish rail transit service that will begin no later than the date by which 50% of the project’s total building gross floor area will be occupied.
  • Or
  • A local government has dedicated funding or reimbursement commitments from future tax revenue for the development of stations, platforms, or other rail transit infrastructure that will serve the project no later than the date by which 50% of the project’s total building gross floor area will be occupied.
  • OR

    Option 4. Sites with nearby neighborhood assets
    Include a residential component equaling at least 30% of the project’s total building gross floor area (exclusive of portions of parking structures devoted exclusively to parking) and locate the project near existing uses (see Appendix 1) such that the project boundary is within a ¼-mile (400-meter) walking distance of at least five uses, or such that the project’s geographic center is within a ½-mile (800-meter) walking distance of at least seven uses. The following restrictions apply.
    • A use counts as only one type (e.g., a retail store may be counted only once even if it sells products in several categories).
    • No more than two uses in each use type may be counted (e.g., if five restaurants are within the required distance, only two may be counted).
    • The uses accessible to the project must represent at least two categories.
See all forum discussions about this credit »

What does it cost?

Cost estimates for this credit

On each BD+C v4 credit, LEEDuser offers the wisdom of a team of architects, engineers, cost estimators, and LEED experts with hundreds of LEED projects between then. They analyzed the sustainable design strategies associated with each LEED credit, but also to assign actual costs to those strategies.

Our tab contains overall cost guidance, notes on what “soft costs” to expect, and a strategy-by-strategy breakdown of what to consider and what it might cost, in percentage premiums, actual costs, or both.

This information is also available in a full PDF download in The Cost of LEED v4 report.

Learn more about The Cost of LEED v4 »

Documentation toolkit

The motherlode of cheat sheets

LEEDuser’s Documentation Toolkit is loaded with calculators to help assess credit compliance, tracking spreadsheets for materials, sample templates to help guide your narratives and LEED Online submissions, and examples of actual submissions from certified LEED projects for you to check your work against. To get your plaque, start with the right toolkit.

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

For All Projects
Either (1) locate the project on a site served by existing water and wastewater infrastructure or (2) locate the project within a legally adopted, publicly owned, planned water and wastewater service area, and provide new water and wastewater infrastructure for the project. The site should also meet the requirements of one of the following four options.
Option 1. Infill sites
Locate the project on an infill site.

OR

Option 2. Adjacent Sites with Connectivity
Locate the project on an adjacent site (i.e., a site that is adjacent to previously developed land) where the connectivity of the adjacent land is at least 90 intersections per square mile (35 intersections per square kilometer) as measured within a ½-mile (800-meter) distance of a continuous segment of the project boundary that constitutes at least 25% of the total project boundary and is adjacent to previous development. Existing intersections may be counted if they were not constructed or funded by the project developer within the past 10 years. Locate and/or design the project such that a through-connection (of the circulation network) intersects the adjacent portion of the project boundary at least every 600 feet (180 meters) on average and at least every 800 feet (245 meters), connecting it with an existing circulation network outside the project; non-motorized through-connections of the circulation network may count for no more than 20% of the total. The exemptions listed in NPDp3 Connected and Open Community do not apply to this option.

OR

Option 3. Transit corridor
Locate the project on a site with existing or planned transit service such that at least 50% of dwelling units and nonresidential use entrances (inclusive of existing buildings) are within a ¼-mile (400-meter) walking distance of bus or streetcar stops, or within a ½-mile (800-meter) walking distance of bus rapid transit stops, light or heavy rail stations, or ferry terminals, and the transit service at those stops in aggregate meets the minimums listed in Table 1. Projects must meet the requirements for both weekday and weekend trips and provide service every day.
Table 1. Minimum daily transit service...minimum weekday and weekend trips per transit type

Weekday trips

Weekend trips

Projects with multiple transit types (bus, streetcar, rail, or ferry)

60

40

Projects with commuter rail or ferry service only

24

6

If transit service is planned but not yet operational, the project must demonstrate one of the following:
  1. The relevant transit agency has a signed full-funding grant agreement with the Federal Transit Administration (or equivalent national agency for projects outside of the U.S.) that includes a revenue operations date for the start of transit service. The revenue operations date must be no later than the date by which 50% of the project’s total building gross floor area will be occupied.
  2. For bus, streetcar, bus rapid transit, or ferry service, the transit agency must certify that it has an approved budget that includes specifically allocated funds sufficient to provide the planned service at the levels listed above and that service at these levels will begin no later than the date by which 50% of the project’s total building gross floor area will be occupied.
  3. For rail service other than streetcars, the transit agency must certify that preliminary engineering for a rail line has begun. In addition, the service must meet either of these two requirements:
  • A state legislature or local subdivision of the state (or a local government for projects outside the U.S.) has authorized the transit agency to expend funds to establish rail transit service that will begin no later than the date by which 50% of the project’s total building gross floor area will be occupied.
  • Or
  • A local government has dedicated funding or reimbursement commitments from future tax revenue for the development of stations, platforms, or other rail transit infrastructure that will serve the project no later than the date by which 50% of the project’s total building gross floor area will be occupied.
  • OR

    Option 4. Sites with nearby neighborhood assets
    Include a residential component equaling at least 30% of the project’s total building gross floor area (exclusive of portions of parking structures devoted exclusively to parking) and locate the project near existing uses (see Appendix 1) such that the project boundary is within a ¼-mile (400-meter) walking distance of at least five uses, or such that the project’s geographic center is within a ½-mile (800-meter) walking distance of at least seven uses. The following restrictions apply.
    • A use counts as only one type (e.g., a retail store may be counted only once even if it sells products in several categories).
    • No more than two uses in each use type may be counted (e.g., if five restaurants are within the required distance, only two may be counted).
    • The uses accessible to the project must represent at least two categories.
See all LEEDuser forum discussions about this credit » Subscribe to new discussions about ND-v4 SLLp1