- GreenSpec Insights
- Energy Solutions
- BuildingGreen's Top Stories
- BuildingGreen Talks LEED
We live in a world of gadgets and stuff. When it comes to saving energy, we look to high-efficiency light bulbs or dishwashers. Or we use the advanced weatherstripping to seal our windows or add insulation in our attics. And hopefully we’ll look at fuel-economy ratings when shopping for our next car.
Those are important things to be doing—and we should continue paying attention with all of our purchases. But we should also recognize that behavior is a big part of our overall energy consumption.
The fact is, you can build two identical homes, right next to each other—with the same insulation levels, the same windows, the same appliances, and the same lighting—and the energy bills for those homes can differ by a factor of two, because they are operated differently.
Operating houses in a more energy-efficient manner
So how can homeowners modify the energy performance of their homes? There are lots of ways—many of them so obvious one might be tempted not to even list them. But we sometimes overlook the obvious.
So here’s a starter list—all of them costing nothing. I’m hoping you will comment at the end of this blog with your own suggestions of other ways to reduce home energy consumption based on how you operate your home—or what you recommend to your clients.
In an upcoming column, we’ll take to the road and look at how decisions we make affect our energy use in getting around.
Turn off the lights
As I write this, I notice that we have two kitchen lights on that aren’t really needed. I’m not without guilt when it comes to failing to carry out this obvious energy-saving strategy.
Some of us want to rely on special devices to ensure that we don’t waste lighting energy—occupancy sensors that turn out lights automatically when people leave a room—but we don’t need anything new to make this happen. Creating a culture of paying attention is the easiest solution, and it doesn’t cost anything and doesn’t break down.
Close off unused portions of your home
Reducing the square footage of a home that’s being heated can save a lot of energy. If you have a couple guest rooms that aren’t used on a regular basis, consider closing them off and adjusting your heat distribution system to deliver less heat to those spaces.
With forced-air heat, this involves closing the air-supply register (which results in more warm air delivery to other rooms). If you have hydronic heat (baseboard hot water), there’s usually a long metal flap on baseboard convectors that can be closed to block the release of heat from these units (and keep most of the heat in the hot-water pipe to reach the next room). Neither of these adjustments blocks off all of the heat to these unused rooms—and that’s usually a good thing, as you don’t want to rooms to get too cold—but these adjustments can save a significant amount of energy.
Turn down the heat
How you set your thermostats can have a huge impact on your heating energy use. Set-back and programmable thermostats help with this (and I strongly recommend them), but you can also adjust thermostats manually on a daily basis. A common rule-of-thumb (that may or may not be very accurate) is that for every degree Fahrenheit a thermostat is turned down, savings of 2% in total heating energy use is realized.
So for example, if you keep the house at a constant temperature, reducing the setting from 72°F to 67°F (five degrees) would reduce your heating bill by 10%. Or, a nighttime (8-hour) setback from 72°F to 62°F would reduce your heating bill by about 7% (20% divided by three since the setback is only for eight hours).
Advanced programmable thermostats allow multiple temperature settings during a 24-hour period so that the temperature can be lowered during the day when homeowners are out of the house and again at night when they are sleeping. These thermostats typically allow a different weekend setting. (Note that with radiant floor heating, setback may not be recommended due to the thermal flywheel effect of the concrete slab; get advice from the installer about operation.)
The same setback argument applies in the summer if you use air conditioning—though in reverse. You can save a lot of electricity use for air conditioning by raising your thermostat setting.
Operate storm windows properly
If you have storm windows make sure they’re properly installed in the fall. With triple-track models, make sure the glass panels are properly in their tracks and all the way closed. With old-style wooden storm windows, make sure they’re all back on the windows by the time temperatures drop and ventilation is no longer needed. To simplify the seasonal adjustments with our wooden storm windows, we only remove the storms from those windows we use for ventilation. The other storm windows stay up all year.
Take shorter showers
Heating water is often the second-largest energy use in a home, and in a highly insulated home it’s not uncommon for it to be number-one. Our largest use of hot water is often showering, so by taking shorter showers significant savings can be realized. No big surprise there.
Another showering habit that will save energy is to reduce the flow when shampooing or shaving. For this reason, I prefer shower valves that have separate controls for both temperature and volume so that the flow can be adjusted without affecting the temperature mix. If you have a single lever that controls only the temperature, you can install a showerhead with a cut-off valve that reduces the flow to a trickle, or a valve that’s installed between the stem and showerhead.
Wash clothes with cold water
Another simple and fairly obvious strategy for saving energy is to switch to cold-water washing. We’ve been washing most of our clothes in cold water for several years now, though we still use hot or warm for certain loads. Use a detergent optimized for cold-water washing.
You can also save energy by hanging clothes outside. Some people I know line-dry their laundry, but then put in the dryer for a few minutes to fluff it and remove the stiffness from outdoor drying.
Operate your dishwasher with full loads
Dishwashers consume energy both by using hot water and from the heated drying cycle. If you use the dishwasher less frequently by only running it when it’s all the way full, you’ll save energy. You can also turn off the electric-heat dry function. With the several dishwashers my wife and I have owned over the past 30 years I don’t think we’ve ever used the electric drying option.
Other no-cost ways to save energy
I’ve provided here just a few examples of simple ways to save energy in our homes simply by changing the way we do things. There are lots of other examples having to do with cooking, refrigerators, how we dress, and using fans instead of air conditioning. What are your favorite strategies?
Alex is founder of BuildingGreen, Inc. and executive editor of Environmental Building News. He also recently created the Resilient Design Institute. To keep up with Alex’s latest articles and musings, you can sign up for his Twitter feed.
We installed these in our new house and they work great. Excellent product.
With a little patience you can find the material information embedded in their pdfs. But it looks to me like some of the...
A building is created, built, run, impacted, used and abused by dozens, hundreds, and even tens of thousands of the least..." More...
Bryan, the article above discusses mounting considerations relative to heating. I think it's up to you to weigh whether those considerations are..." More...
Bryan J says, "
Thanks Triston, but what do you think would be a suitable location for the inside unit, should I mount it up high, about 7 feet or mount it lower..." More...
Tristan Roberts says, "
Bryan, if you want to provide heating and cooling, and if doing so electrically is attractive, then I don't see any issue with using a mini-split..." More...
Bryan J says, "
I have been reading the comments on the mini splits, let me tell you what I have and what I'm looking to do. Any comments will help me. I have a..." More...
Archives by Category
AIA Convention (18) [RSS]
Authors (7) [RSS]
Awards (7) [RSS]
Behind the Scenes (44) [RSS]
Books & Media (69) [RSS]
BuildingEnergy Conference (3) [RSS]
BuildingGreen Talks LEED (53) [RSS]
BuildingGreen's Top Stories (101) [RSS]
Bulletin (7) [RSS]
Case Studies (27) [RSS]
Colleges and Universities (2) [RSS]
Energy Solutions (278) [RSS]
Events (93) [RSS]
Google Earth/Sketchup (5) [RSS]
Greenbuild '07 (27) [RSS]
Greenbuild '08 (29) [RSS]
Greenbuild '09 (14) [RSS]
Greenbuild '10 (7) [RSS]
Greenbuild '11 (6) [RSS]
GreenSpec Insights (195) [RSS]
LEED (51) [RSS]
Living Future (5) [RSS]
Miscellania (41) [RSS]
Nature & Nurture (70) [RSS]
Op-Ed (65) [RSS]
Passive Survivability (7) [RSS]
Politics (32) [RSS]
Product Talk (103) [RSS]
Q&A (9) [RSS]
Resilient Design (11) [RSS]
Riversong's Radical Reflections (12) [RSS]
Science & Tech (30) [RSS]
Sticky Business (11) [RSS]
The Industry (97) [RSS]
Water Wise Guys (11) [RSS]